ABB Changeover ATS - Various Ratings (Single Phase)

Professional ABB single-phase changeover automatic transfer switches available in multiple current ratings. Perfect for applications requiring automatic switching between two utility power sources.
Manufacturer: ABB

Product Specification for Mains to Generator Operation of a 25 Amp ABB Single Phase

1) 2 x 4 Pole AC1 Rated Contactors, Electrically & Mechanically Interlocked "break before make"
2) Phase Failure Relay For Mains Monitoring DSE327
3) Mains (Utility) – Delay On Load Timer ( Pre Set 10sec ) DSE327
4) Generator – Delay On Load Timer ( Pre Set 30sec ) DSE327
5) 10 Amp Mains L1- 240v A/c Auxiliary Supply For ( B/Charger / W/Heater)
6) Set Rated Fuses for the control circuit
7) Mains On Load Volt Free Contact ( For BMS )
8) Generator On Load Volt Free Contact ( For BMS )
9) Set Volt Free Contacts for remote Start Facility ( 2 Wire Start ) ( DSE327)
10) Mounted Within a Steel Enclosure, with Top & Bottom Removable Gland Plates.
IP65 Rated RAL7035 With Lockable Door 1 Key Supplied & Wall Mounting Brackets


LED Indication
Mains Available (GREEN), Mains On Load (RED)
Generator Available (GREEN), Generator On Load (AMBER)

 

We also have Contactor Options from

LOVATO –

TERASAKI –

ICG –

If you require a different manufacturer, please contact us and we will add these to our range.

 

ADDITIONAL OPTIONS IF REQUIRED- IF NOT SHOWN PLEASE CALL FOR PRICING

Auto Test Facility Switch With 2 Keys, Primary Mains Failure simulation

Deep-Sea - 12v & 24V Dc Battery Charger

Modbus RS485 Connections Available

Digital Metering For Voltage / Current  - Including Current Transformers

Picture of Changeover ATS - 30 Amp ABB Single Phase N

Changeover ATS - 30 Amp ABB Single Phase N

Here At Blades Power, we have a full range of Automatic Transfer Switches Manufactured In House Using . They are built to the highest standard, all panels are fully tested and issued with a serial No. Every Panel is dispatched with a copy of the Electrical Schematic and test report + All Datasheets for each electrical internal part.
SKU: ABB330MG
Delivery date: 3-5 days
£774.40
Picture of Changeover ATS - 25 Amp ABB Single Phase N

Changeover ATS - 25 Amp ABB Single Phase N

Here At Blades Power, we have a full range of Automatic Transfer Switches Manufactured In House Using . They are built to the highest standard, all panels are fully tested and issued with a serial No. Every Panel is dispatched with a copy of the Electrical Schematic and test report + All Datasheets for each electrical internal part.
SKU: ABB325MG
£757.90