Deep Sea Electronics ATS Controller - Various Ratings (Three Phase)

Specifications:

275 Amp 3 Phase (4 Pole) Automatic Transfer Switch ( STANDARD WITH DSE327)

Mounted into a 1200 High 800 Wide 400 Deep All Steel Enclosure.

• 1xPairof  4 Pole AC1 Rated Contactors with a 240v a/c Coil, mechanically and electrically interlocked
• 1x Set of control and monitoring fuses to suit.
• 1x Set of load terminations
• 2x Set of Auxiliary Contacts.
• 1x Set of Contacts for generator Auto Start
• 1x Set 10 Amp Auxiliary Output Terminals for battery charger or other 
• 1x Set of Electrical Drawings.

OPTIONAL DSE333 

 The DSE333 is an Automatic Transfer Switch Controller for genset and other applications. The module will monitor the voltage and frequency of the incoming AC Generator (1) supply and in the event of a failure, will issue a start command to the generator (2) control system. Once the generator is available and producing an output within limits, the DSE333 will control the transfer device and switch the load from the Generator (1) to the generator (2). Once the Generator (1) supply returns to within limits, the module will command a return to the Generator (1)  supply and shut down the generator (2) after a suitable cooling run. Various timing sequences are available to prevent nuisance from starting on minor supply breaks. The DSE333 supports many topologies and features include mains (utility) rated volt-free relays, a clear back-lit LCD 4-line text display, showing system status and warnings and red and green LEDs indicating operational status. The modules can be easily configured using the DSE Configuration Suite PC Software. Selected front panel editing is also available. Configurable volt-free digital inputs and outputs make the DSE333 fully flexible to suit a wide variety of applications. 

Generator (1) Available LED.

Generator (1) On Load LED.

Generator (2) Available LED.

Generator (2) On Load LED.

Generator Auto Start connections.

IP65 fully-rated steel enclosure