Search
Filters
Close
Motorized Transfer Switch (MTS) Motorized switch's with center off position, to enable automatic selection of 2 different supplies.
Manufacturer part number: ABBMOTS4400
Manufacturer: ABB
£3,366.15 incl tax

Motorized Transfer Switch (MTS)

 

Standard Full Spec Motorised Automatic Transfer Switch

4 Pole AC21A Rated (380-415V ) 40 °C  - Three Phase + Neutral Automatic Motorised Transfer Switch “break before make”

1 x Phase Failure relay for mains monitoring.

1 x Mains & Generator Delay on Load Timers.

1 x 240v Ac 10 Amp Auxiliary Supply from Mains Supply L1

1 X Set Rated Fuses for control circuit

1 x Set Volt Free Contacts for remote Start Facility ( 2 Wire Start )

 

LED Indication

Mains Available (GREEN), Mains On Load (RED)  

Generator Available (GREEN), Generator On Load (AMBER)

 

Motorized switch's with center off position are used to enable automatic selection of 2 different supplies. 

Most commonly a mains supply and a back-up generator supply.

Utilising the range of switches From the ABB & Socomec , these are equipped with motor operators and are programmable electronic control delay timers for both supplies and provide signalling to stand-by supply or generator as required.

You can also use this system as a manual transfer switch.

ALL PANELS ARE RATED AT AC21A SO IF YOU REQUIRE AN ALTERNATIVE RATE PLEASE CALL FOR A QUOTATION

 

3 or 4 Pole switching from 160 to 1600Amp, up to 400Vac.

As with other changeover systems, a range of enclosure options are available and we are happy to engineer specific application solutions.

If you have any questions or bespoke requirements please call one of our sales team (contact) 

or email us at.sales@bladespowergeneration.com

Motorized Transfer Switch (MTS)

 

Standard Full Spec Motorised Automatic Transfer Switch

4 Pole AC21A Rated (380-415V ) 40 °C  - Three Phase + Neutral Automatic Motorised Transfer Switch “break before make”

1 x Phase Failure relay for mains monitoring.

1 x Mains & Generator Delay on Load Timers.

1 x 240v Ac 10 Amp Auxiliary Supply from Mains Supply L1

1 X Set Rated Fuses for control circuit

1 x Set Volt Free Contacts for remote Start Facility ( 2 Wire Start )

 

LED Indication

Mains Available (GREEN), Mains On Load (RED)  

Generator Available (GREEN), Generator On Load (AMBER)

 

Motorized switch's with center off position are used to enable automatic selection of 2 different supplies. 

Most commonly a mains supply and a back-up generator supply.

Utilising the range of switches From the ABB & Socomec , these are equipped with motor operators and are programmable electronic control delay timers for both supplies and provide signalling to stand-by supply or generator as required.

You can also use this system as a manual transfer switch.

ALL PANELS ARE RATED AT AC21A SO IF YOU REQUIRE AN ALTERNATIVE RATE PLEASE CALL FOR A QUOTATION

 

3 or 4 Pole switching from 160 to 1600Amp, up to 400Vac.

As with other changeover systems, a range of enclosure options are available and we are happy to engineer specific application solutions.

If you have any questions or bespoke requirements please call one of our sales team (contact) 

or email us at.sales@bladespowergeneration.com

Products specifications
Component Manufacture ABB
Requirement Industrial 3 Phase + N 415v
Amp Rating 400 Amp
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
Products specifications
Component Manufacture ABB
Requirement Industrial 3 Phase + N 415v
Amp Rating 400 Amp