Search
Filters
Close
RSS

Blog posts of '2023' 'January'

5 Factors To Consider Before Purchasing New Generators in the UK

Whether you are running a business or a home, power is something that we all depend on. Even a few minutes without power can cause immense problems in some situations. New generators for sale in the UK are a good choice if you would rather avoid power outages. However, before you buy, there are certain things you need to consider about a generator.

The Key Factors to Consider Before Purchasing a Generator

1. Load BankTesting: A load bank unit is designed to accurately replicate the operating load your generator will reach during operation. A large boiler matches the generator's output and ensures that the generator does not wear out to the point where one day, it is no longer able to supply power to the building and is consequently shut down.

2. Age, operating hours, and usage: The first thing to check is the generator's operating hours, age, and history. You need to check how many hours the generator has been in use and how much fuel it consumes. Usually, generators are like cars and have an odometer. A generator used as a standby or backup power source is usually better maintained and has much less wear and tear than a generator used as a primary power source. Only those with technical expertise know the full features and specifications of generators. Therefore, you should seek advice from a professional before buying new generators for sale in the UK.

3. Fuel tank capacity and litres per operating hour: You want a generator that is economical in consumption but also one that holds a reasonable amount of fuel. Some generators adjust their engine speed (RPM) to the load demand to increase fuel efficiency. Both fuel efficiency and fuel tank size affect running time. You'll find the generator's running time under the respective unit's technical data.

4. The manufacturer's reputation: If you want to buy a new generator, you should find out about the manufacturer's history and reputation. Manufacturers with poor reviews or low reputations should be avoided. It's better to invest and be assured that you have chosen a trustworthy manufacturer with a good reputation for producing reliable equipment.

5. Visual inspection: If not you, trained personnel should inspect all mechanical components of a generator for wear or fatigue, including whether any parts are cracked or corroded corrosion build-up. Any parts found to be questionable should always be replaced. The bearings and bushings should also be returned as they are challenging to test for wear and tear – so it's best to replace them regardless of their function or condition.

Now that you know what factors you must consider before investing in a new generator, visit Blades Power Generation to receive relentless generator service; we have the best emergency power source in the UK. With our vast range of products, you will never run out of power, literally!

How to Select Manual Transfer Switch?

The manual transfer switch simply connects the home circuit to the generator. In the event of a power outage, the operator should turn on the backup power supply so that the backup power supply turns on all loads connected to the circuit. This switch can be easily used indoors and outdoors. You can manually connect the number of circuits based on the generator power. 

A Lifesaver in Disguise

Manual transfer switching (MTS) is a lifesaver when you need a safe and very fast power supply. Therefore, choosing the right size manual toggle switch can be difficult, especially when the supply capacity required for the building is unknown.

Selecting a manual transfer switch mainly depends on various parameters, such as an amplifier, circuit, and power supply. Take a look: 

Amp

The use of this switch mainly depends on the size of the generator and the properties you have, so a small or large manual transfer switch is used. Larger switches draw more amperes, and smaller switches draw fewer amperes. 

For example, a large company with large stores with multiple systems will need a larger manual transfer switch due to the use of larger generators.

Circuit

Some business owners may choose to power more circuits than their competitors during a power outage. Regardless of the cause or duration of the power outage, there is a need to power a variety of systems critical to daily operations. So manual switches handle a lot of dedicated switching.

Wattage

The wattage required for a generator to operate safely depends primarily on the electrical capacity of the building and the number of circuits it runs. If you need to control more circuits, you need maximum wattage

Watt meter

Many manual switchers have built-in power meters that track what is being powered. Without a power meter, the system can be overloaded and damage your device or generator.

Things to Remember

Do not connect the generator directly to a household outlet. It is called back feeding. It may cause an electric shock or a house fire. Proper installation of these switches can therefore eliminate these risks. 

Take away 

Several options are available for automatic changeover switches, but using manual switches has many advantages. They ensure better security, easier powering of wired devices such as air conditioners, and connectivity across service panels. 

Visit Blades Power Generation for a variety of manual transfer switches and build your understanding of the product based on your needs and budget.