ENGINE CONTROL PANELS
FROM - BLADES POWER GENERATION LTD
Specialist Manufacturers of Power Generation Equipment.
Automatic, Manual and Bespoke Panels built to your requirements.
Deep Sea Automatic Mains Failure 7220 Generator Control Panel
Sometimes it gets confusing if you are not aware of terminlogy used by the industry. Thats why we have friendly staff to help you - Call +44 (0)1453 799655
The AMF Generator Control Panel is used where the mains supply is backed up by a rated sized Generating set. The AMF Panel monitors the mains supply and if this should fail or fall outside the preset limits (This can be configured via a laptop). The AMF Panel will control the pre-heating, Fuel Solenoid and starting of the generator.
The AMF Panel will Control the switching of the load from the Mains supply to the generator, whilst the generator is running the AMF Panel will monitor vital Engine and Alternator parameters safely stopping the generator should a fault condition occur.
Over / Under Voltage
Over / Under Speed
ADDITIONAL GENERATOR PROTECTION
Low Coolant Level Shutdown
Low Fuel Level Shutdown
Audible Alarm Indication (Siren)
Visual Alarm Indication (Beacon)
On return of the local supply the AMF Panel will monitor the Supply to ensure it is stable, then transfer the Load from the Generator back to the Mains supply.
The AMF Panel will run the generator on for a pre-determined time to allow for any cool down periods required for the Generating Set.
Once this time has elapsed the AMF Panel will control the Stopping of the Generator.
The Engine Control Panel module requires a DCc supply to function. This can be fed from the generator starting battery - alternative Dc power supplies available.
PLEASE SPECIFY (12Vdc OR 24Vdc) VOLTAGE WHEN ENQUIRING!
Dont Panic and Keep Calm if all this information is difficult to grasp. We have friendly experts on the end of a phone for you to talk with whilst you carry on drinking your tea.
Telephone +44 (0)1453 799655
so YOU are not left in the dark!